Installs run October through mid-December. Takedowns in January. Book by October 31 for the Lit by Thanksgiving Guarantee  ·  (406) 207-2524
The Classic C9 Outline

Roofline and Gutter Christmas Lighting in Missoula

C9 LED bulbs on socket wire cut to your exact peaks and gutter runs, held with shingle tab and gutter clips so your roof looks the same in April as it did in October.

The roofline is the part of a display everyone sees from the street, and it is also the part most likely to go wrong. Loose strands sag between clips, and a single dark bulb in a straight run stands out from a block away. We build rooflines with commercial C9 LED bulbs screwed into heavy-gauge socket wire that we cut to the measured length of every run on your house. Peaks get a bulb right at the point and corners meet without a gap. Because the crew that hangs them works on roofs for Constructive Brothers the rest of the year, the strand follows the roof edge with the kind of straight line a framer expects to see.

Attachment is where most roof damage happens, and it is the reason we never use staples or nails. On asphalt shingles, a shingle tab clip slides under the bottom course and grips the socket wire. Where the gutter sits proud of the drip edge, a gutter clip snaps over the lip and holds the bulb upright. Newer builds around Missoula with steep standing-seam metal roofs get a clip made for the seam instead. Ice dams are a real concern on rooflines that face north, so we keep the wire out of the gutter trough where it would freeze into the ice and route it along the fascia. Every run ends at a GFCI outlet through a photocell timer.

Roofline-only installs on most Missoula homes run $400 to $1,600 for a first season, with total linear footage and the number of peaks and stories being the biggest factors.

Get Your Price

Send your address and what you have in mind. We reply with a price, usually the same day. Most homes: $700 to $2,500 for the full season.

No spam, no pressure. Prefer to talk? Call or text (406) 207-2524.

Why Us

Why Missoula Chooses Us for Roofline & Gutter Lighting

Cut to the inch

We measure every eave and gable on your house and cut socket wire to match, then space C9 bulbs at 12 inches so the outline reads evenly from the road. There are no coiled leftovers at the corners and no gaps where a stock strand ran short.

Shingle tab and gutter clips only

Each clip type is chosen for the edge it sits on. Shingle tab clips tuck under asphalt shingles and gutter clips grip the outer lip of the gutter, with seam clips for standing-seam metal. None of them pierce anything, which is why we can promise your roof is unchanged when the lights come down.

Built for snow load and wind

Clips are spaced every 12 inches on exposed runs so a Bitterroot wind cannot lift the wire off the edge, and the socket wire is rated for the weight of wet snow sitting on it for weeks. Bulbs face outward and slightly down so early snow slides past rather than piling on the socket.

Strands that come back next year

Because each run is cut to your house, the strands go into labeled storage in January and come back out for you the next fall. That is why returning customers pay noticeably less: the measuring and cutting are already done and install day is mostly clipping and testing.

How It Works

Roofline & Gutter Lighting, Step by Step

Measure and map

During the free design visit we measure each roofline segment and sketch which edges get lit. Most homes light the front-facing eaves and gables, and some add the garage or a back deck that faces the yard.

Cut and bulb the socket wire

In the shop we cut socket wire to each measurement and screw in C9 LED bulbs in your chosen color, then power up each run on the bench before it leaves.

Clip the roofline

On install day we work from ladders or the roof depending on pitch, clipping every foot along the edge and dressing the wire so bulbs stand straight. Runs are joined at the corners and connected to the timer at the outlet.

Test at dusk

We set the photocell timer and confirm the whole outline lights together. If you want the roofline dark until a certain date, we program that before we leave, and our 48-Hour Repair Promise starts that evening.

Gallery

Roofline & Gutter Lighting We've Done

Browse the Gallery →

FAQs

Roofline & Gutter Lighting Questions, Answered

Will clips damage my shingles or gutters?
No. Shingle tab clips slide under the bottom edge of the shingle without lifting the seal, and gutter clips grip the outer lip with a spring tension that leaves no mark on aluminum or steel. We do not staple or nail anything to the roof. When we take the lights down in January we remove every clip with the strand, so you are not left with a row of plastic clips along the eave in spring.
Can you light a steep metal roof?
Yes. A lot of newer construction in Missoula and the Bitterroot uses standing-seam metal, and the crew installing your lights builds on those same roofs during the rest of the year for Constructive Brothers. We use seam clips that clamp to the raised rib without any screw, and we plan the work for a dry day because metal with frost on it is not a surface anyone should be walking. Snow slides off metal fast, so we also keep the bulbs clear of the slide path.
What colors and bulb styles do you offer?
Our standard roofline bulb is a faceted C9 LED, the classic large bulb most people picture on an eave. Warm white is the most requested color in Missoula because it suits both older homes in town and the newer builds in Grant Creek. We also stock cool white, red, green, blue and multicolor, and patterns like alternating red and white are easy since we screw each bulb in by hand at the shop. You pick during the design visit.
How much power does a C9 LED roofline use?
Very little. A C9 LED bulb draws about a tenth of a watt, so a 150-foot roofline with 150 bulbs uses roughly 15 watts, less than a single incandescent porch bulb. That is why we can run an entire house from one GFCI outlet with a photocell timer and stay far under the 15-amp limit of a normal exterior circuit. Where a house has no exterior outlet near the roofline, we run a rated outdoor extension cord of 16 gauge or heavier from the nearest one.
Service Areas

Roofline & Gutter Lighting Across Missoula and the Bitterroot

Based in Missoula. Bitterroot, Frenchtown, Blackfoot and Seeley Lake homes are grouped into route days so installs happen on schedule.

Related Services

Often Added to This Package

Outline your roofline before the snow flies

Free design visit. Posted pricing. Lit by Thanksgiving Guarantee when you book by October 31.

Get a Free Quote